Product Introduction
Metal Seated Full Bore Ball Valves provide quarter-turn isolation for industrial pipelines handling high-temperature fluids, abrasive media and demanding process conditions. The full-bore passage matches the specified pipeline size, while metal-to-metal seating provides a sealing interface suited to elevated-temperature and wear-intensive service. Body materials, ball and seat treatments, stem packing and operating components are selected according to process pressure, temperature and media. Size, end connections, actuation and inspection requirements can be configured to match project specifications.
Key Features
Full-Bore Flow
The ball passage matches the specified nominal pipe size, supporting low flow restriction and pipeline cleaning where the bore and system layout permit.
Metal-to-Metal Seating
Machined ball and seat surfaces provide the sealing interface. Selected hard-facing treatments help resist surface wear under specified operating conditions.
Supported Ball Design
Floating-ball or trunnion-mounted construction can be selected according to valve size, pressure class, differential pressure and operating torque.
Flexible Operation
Lever, gearbox, pneumatic and electric options accommodate different installation layouts, operating frequencies and control requirements.
Technical Specifications
|
Parameter |
Specification |
|
Valve Type |
Metal Seated Full Bore Ball Valve |
|
Nominal Size |
DN15–DN300 |
|
NPS Range |
1/2–12 in |
|
Pressure Class |
ASME Class 150–600 |
|
Reference Temperature Range |
-29°C to 450°C |
|
Body Materials |
Carbon Steel, Stainless Steel, Alloy Steel |
|
Ball Materials |
Stainless Steel, Hardened Alloy Steel |
|
Seat Materials |
Hardened Stainless Steel, Cobalt-Based Alloy |
|
End Connections |
Flanged, Butt Weld |
|
Operation |
Lever, Gearbox, Pneumatic, Electric |
|
Design Standard |
ASME B16.34, API 6D where applicable |
|
Testing Standard |
API 598 or specified project standard |
Materials and Sealing Options
Body Materials
Carbon steel, stainless steel and selected alloy steels can be specified according to process conditions, corrosion requirements and applicable material standards.
Ball and Seat Treatments
Hard-facing alloys or carbide-based coatings can be selected according to media abrasiveness, operating temperature and contact conditions. Treatment and surface finish are specified for the intended service.
Stem Packing
Packing and body sealing materials are selected for temperature, fluid compatibility and emission-control requirements. Graphite-based packing is available for suitable high-temperature configurations.
Seat Leakage Criteria
The required shut-off class and test procedure should be defined before order confirmation. Acceptance criteria are verified against the specified standard and actual valve configuration.
Industrial Applications
Oil and Gas
Pipeline isolation and hydrocarbon processing duties requiring full-bore flow and metal seating within the specified operating limits.
Chemical and Petrochemical Processing
Process lines carrying elevated-temperature fluids or media requiring carefully selected corrosion-resistant materials.
Power Generation
Thermal-fluid and selected steam isolation duties matched to the pressure rating, packing and seat configuration.
Mining and Mineral Processing
Selected abrasive-fluid and solids-handling applications where particle characteristics, seat protection and flow conditions are included in the design review.
Refining and Industrial Heating
Isolation of hot process fluids using materials and sealing arrangements matched to the specified service conditions.
Design and Configuration Options
Ball Support
Floating-ball and trunnion-mounted designs are selected according to valve size, pressure class, differential pressure and operating torque.
End Connections
Flanged and butt-weld ends can be specified to match pipeline dimensions, installation requirements and applicable standards.
Actuation
Manual gearboxes, pneumatic actuators and electric actuators can be configured according to torque, operating frequency, control signals and available utilities.
Special Design Requirements
Fire-safe construction, anti-static features, cavity pressure relief and fugitive-emission qualification can be reviewed when required by the project specification.
Manufacturing and Quality Control
Dimensional Inspection
Bore size, face-to-face length, end connections and mounting interfaces are checked against approved drawings and applicable dimensional standards.
Material Traceability
Material identification and certification requirements are defined for pressure-containing components and specified trim parts. Material certificates can be supplied as required by the order.
Sealing Surface Inspection
Ball and seat surfaces are checked for dimensional accuracy, surface finish and conformity with specified machining and coating requirements.
Pressure and Seat Testing
Shell and seat tests follow the applicable standard and approved inspection plan. Test pressure, duration, acceptance criteria and reporting requirements are established for the selected configuration.
Customization and Engineering Support
Project-specific configurations can include valve size, pressure class, body and trim materials, hard-facing treatments, end connections, operating equipment and inspection documentation.
Engineering review covers process media, working and design pressure, minimum and maximum operating temperatures, differential pressure, required shut-off performance and operating frequency. Drawings, pipeline specifications and valve datasheets support configuration review before order approval.
Ordering Information
Provide the following details for technical review and quotation:
- Nominal size and pressure class
- Working pressure and design pressure
- Minimum and maximum operating temperatures
- Process media and particle characteristics
- Required body, ball and seat materials
- End connection type and dimensional standard
- Manual or automated operating requirements
- Required leakage class and testing standard
- Material certificates and inspection documentation
- Quantity and requested delivery schedule
Frequently Asked Questions
Q: What is a metal seated full bore ball valve used for?
A: It provides pipeline isolation where full-bore flow and metal-to-metal seating are required, including selected high-temperature and abrasive services.
Q: What does full bore mean?
A: The ball passage is matched to the specified nominal pipe size. The actual bore diameter is confirmed by the approved drawing.
Q: Can it handle abrasive media?
A: Selected abrasive services can be considered with suitable ball materials, seat treatments and operating arrangements. Particle size, concentration and process conditions determine the appropriate configuration.
Q: What is the maximum operating temperature?
A: The allowable temperature depends on body material, pressure rating, seat design and packing. The applicable pressure-temperature rating must be confirmed for each configuration.
Q: Can the valve be customized?
A: Yes. Size, pressure class, materials, end connections, operating equipment and inspection requirements can be specified according to project needs.
Hot Tags: metal seated full bore ball valve, China metal seated full bore ball valve manufacturers, suppliers, factory, floating ball valve, high temperature ball valve, isolation ball valve, pipe ball valve, pipeline ball valves, stainless steel ball valves

