Applications

Industrial Valve Applications

 

 

Industrial valve selection begins with the process requirements. Media composition, operating pressure, temperature, connection dimensions and applicable standards all influence the right valve configuration.

 

Industries We Serve

Oil & Gas
Pipeline isolation and process systems require valve configurations that match the specified pressure class, temperature range and piping connections. Selection should account for the process medium, sealing requirements, operating frequency and applicable pipeline specifications.


Chemical & Petrochemical Processing
Fluid composition and process temperature guide the selection of body, ball, stem, seat and seal materials. Confirm material compatibility with the specified medium and concentration, along with the required pressure rating and connection type.

Power Generation

Utility and process lines may operate under defined pressure, temperature and cycling conditions. Review the valve design, material grade, pressure-temperature limits and operating arrangement against the system specification.

Water & Wastewater Treatment

Water quality, treatment chemicals, suspended solids and operating conditions influence material and sealing choices. Valve size, connection dimensions and maintenance access should also match the installation requirements.

General Industrial Processing

Manufacturing plants use valves across fluid transfer, equipment isolation and utility systems. Select the configuration according to the medium, flow-line dimensions, operating conditions and required method of operation.

 

Application Challenges

Pressure and Temperature

Specify normal operating conditions and the maximum design values. Check the selected valve's rated pressure at the intended temperature, taking the body material and applicable rating standard into account.

Media Compatibility

Identify the fluid, concentration and process temperature before confirming materials. Body, ball, stem, seat and seal materials should be reviewed for chemical compatibility and the intended service conditions.

Sealing Requirements

Define the required shut-off performance and applicable leakage acceptance criteria. Seat design, sealing material and pressure conditions should be considered together when selecting the valve.

Operating Conditions

Operating frequency, available installation space and the preferred actuation method affect the final configuration. Confirm manual operation or any specified actuation arrangement, together with access for installation and maintenance.

Valve Solutions by Application

 

Three-Piece Flanged Ball Valves

Suitable configurations may be considered for process isolation where flanged connections and a three-piece body design meet the piping and maintenance requirements. Confirm the model dimensions, pressure rating, materials and applicable flange standard.

01

Socket Weld Ball Valves

These valves may suit piping systems designed for socket-weld connections. Verify pipe size, material specification, connection details and installation requirements before confirming the selected model.

02

Forged Steel Ball Valves

Forged steel construction can be evaluated where the project specification calls for this body type. Selection should be based on the required pressure class, temperature range, material grade and end connection.

03

Insulated Ball Valves

Insulated or jacketed configurations may be considered for processes that require temperature management around the valve. Confirm the available construction, heating arrangement, process temperature and connection dimensions.

04

Wafer-Style Ball Valves

Wafer-style configurations may be considered where the specified installation layout supports this connection arrangement. Check the valve dimensions, pressure limits, mating piping and installation clearances against the project drawings.

05

 

 
Technical Selection Factors
 

Provide the following information to establish the valve requirements:

01/

Process medium: Fluid name, composition, concentration and relevant material compatibility requirements.

02/

Size and connection: Nominal diameter, pipe dimensions, flange standard or specified weld connection.

03/

Pressure: Normal operating pressure and maximum design pressure.

04/

Temperature: Minimum, normal and maximum process temperatures.

05/

Materials: Required body, ball, stem, seat and seal materials.

06/

Operation: Manual lever, gearbox or specified actuation arrangement.

07/

Standards: Required design, dimensional, inspection and testing standards, including the applicable edition where specified.

08/

Order details: Required quantity, delivery destination and target delivery schedule.

 
 
Manufacturing & Quality Assurance

Material Verification

Material grades should be checked against the purchase specification. Available material documentation can support verification of the specified materials and the records required for the order.

 

Machining and Assembly

Component dimensions, fit and assembly should be checked against the approved drawings and applicable manufacturing procedures. These checks help ensure the finished configuration matches the agreed product requirements.

Pressure Testing

Specify the required shell and seat tests, test method and acceptance criteria before order confirmation. Testing should follow the applicable standard and the agreed inspection scope.

Traceability

Where required by the purchase specification, define the identification and records needed to connect materials, inspection results and finished valves with the relevant order.

 

Standards & Compliance
 

Design Standards

Valve design requirements depend on the valve type, pressure class and intended service. Confirm the applicable standard and edition against the project specification.

Pressure Rating

Check the required pressure class and operating temperature against the selected model's rated limits and material specifications.

Dimensions & Connections

Verify nominal size, face-to-face dimensions, flange ratings and end connections against the piping drawings and installation requirements.

Testing & Certification

Specify the required inspection and testing criteria. Confirm that any certification or conformity documents are valid and relevant to the ordered product.

 

Customization & OEM/ODM

 

 

Material Selection: Specify the required body, ball, stem, seat and seal materials according to the process medium, pressure and temperature conditions.

Connection Dimensions: Provide nominal size, connection type, flange standard or weld details to ensure the proposed configuration matches the piping system.

Operating Arrangements: Define the required operating method, such as a manual lever, gearbox or specified actuation arrangement, together with any installation space requirements.

Marking & Packaging: Identify requirements for product labels, nameplates, identification markings and export packaging before order confirmation.

Drawing & Specification Review: Submit drawings, datasheets or reference specifications for technical review. Confirm the approved materials, dimensions, standards and documentation requirements before production.

Inspection & Documentation

 

Material Test Certificates: Specify whether material certificates are required and identify the applicable documentation requirements for the ordered materials.

Pressure Test Reports: Define the required shell and seat pressure tests, applicable test standards and acceptance criteria before order confirmation.

Dimensional Inspection Records: Identify critical dimensions and tolerances that require verification against approved drawings or product specifications.

Product Identification & Traceability: Specify the identification details and traceability records required to link the supplied valves with the relevant order and inspection documentation.

Conformity Documents: Confirm which conformity documents are required for the project and whether they apply to the selected valve model and supply scope.

Installation & Maintenance Instructions: Identify the required instructions, document language and submission format to support installation, operation and maintenance.

Documentation Review: Agree on the document package and submission stage during order review. All records should correspond to the ordered model, specified materials and agreed inspection scope.

 

Project Applications

Process Requirements

Define the process medium, design pressure, operating temperature and service conditions to establish the technical requirements for valve selection.

 

Valve Configuration

Confirm the valve type, nominal size, connection dimensions, material grades and operating arrangement against the project specifications.

Drawings & Technical Data

Provide the valve schedule, process datasheet, piping specification and relevant drawings to support technical review and configuration confirmation.

Inspection Scope

Identify the applicable standards, testing requirements and documentation needed for project acceptance.

Project References

Where verified project records are available and approved for publication, present the application conditions, supplied valve configuration and inspection scope clearly.

Technical Resources

 

Product Datasheets

Review model-specific information, including materials, pressure ratings, temperature limits, nominal sizes and connection details.

01

Dimensional Drawings

Check face-to-face dimensions, connection sizes and installation clearances against the piping layout and equipment drawings.

02

Standards & Specifications

Compare the selected model's technical data with the project standards, required pressure class and applicable inspection criteria.

03

Technical Verification

Resolve outstanding questions about materials, dimensions, operating conditions or documentation before approving the valve for purchase.

04

Document Requests

Provide the model number or project reference when requesting additional technical information. This helps identify the relevant specifications and drawings for review.

05

 

Request an Application-Based Quote

 

 

Send your valve specifications, project datasheet or bill of materials, including media, pressure, temperature, size, connection, materials and quantity. Attach relevant drawings or project standards to support accurate product selection and quotation.