High Pressure Forged Steel Full Bore Ball Valve

High Pressure Forged Steel Full Bore Ball Valve

High Pressure Forged Steel Full Bore Ball Valves provide quarter-turn isolation for industrial pipelines operating under elevated pressure. The forged steel body contains line pressure, while the full bore provides a flow passage sized to meet the specified pipeline requirements. These valves suit applications requiring pipeline isolation, reduced flow restriction, or pig passage where the system design permits. Body materials, pressure classes, seats, and end connections are selected according to operating conditions and project specifications.

Product Introduction

 

High Pressure Forged Steel Full Bore Ball Valves provide quarter-turn isolation for industrial pipelines operating under elevated pressure. The forged steel body contains line pressure, while the full bore provides a flow passage sized to meet the specified pipeline requirements. These valves suit applications requiring pipeline isolation, reduced flow restriction, or pig passage where the system design permits. Body materials, pressure classes, seats, and end connections are selected according to operating conditions and project specifications.

 

Key Advantages

 

Full Bore Flow
The full bore passage reduces flow restriction compared with a reduced bore design of otherwise comparable configuration. It supports pipeline systems where flow capacity and passage clearance are important.
Forged Steel Body
The forged pressure-containing body provides structural strength for specified high-pressure service. Material grade, heat treatment, and body dimensions are determined by the approved design.
Quarter-Turn Isolation
A 90-degree rotation opens or closes the valve. Seat materials and sealing arrangements are selected according to the process medium, operating temperature, and required shut-off performance.
Multiple Operating Options
Lever, gearbox, pneumatic, or electric operation can be specified according to valve size, operating torque, installation space, and control requirements.

 

Technical Specifications

 

Parameter

Specification

Valve Type

Forged Steel Full Bore Ball Valve

Nominal Size

1/2–4 in. (DN15–DN100)

Pressure Class

ASME Class 600, 900, 1500, or 2500, subject to availability

Body Material

ASTM A105/A105N

Ball and Stem

Stainless steel grades

Seat Options

PTFE, reinforced PTFE, PEEK, or metal

End Connections

NPT, socket weld, butt weld, or flanged

Operation

Lever, gearbox, pneumatic, or electric

Design Standard

ASME B16.34, where applicable

Testing Standard

API 598, where applicable

Operating Temperature

Determined by material, seat, pressure rating, and design

 

Materials and Configuration

 

Body Material
ASTM A105/A105N carbon steel is available for compatible service conditions. Low-temperature carbon steel or stainless steel may be specified according to design temperature, corrosion conditions, and process requirements.
Ball, Stem, and Seats
Ball and stem materials are selected for mechanical requirements and medium compatibility. PTFE-based seats, PEEK seats, or metal seats can be considered according to temperature, pressure, fluid properties, and sealing requirements.
End Connections
Threaded, socket-weld, butt-weld, and flanged connections can be specified where supported by the selected model. Connection dimensions and facing must match the piping specification.

 

Industrial Applications

 

Oil and Gas
Pipeline isolation and high-pressure process lines requiring specified pressure ratings, suitable materials, and compatible sealing arrangements.
Petrochemical Processing
Process lines handling compatible fluids, with material selection based on chemical composition, concentration, and operating temperature.
Power and Utilities
High-pressure water, steam, and utility systems where the valve's design and pressure–temperature ratings meet service requirements.
Industrial Gas Systems
Gas handling equipment and process skids requiring full bore isolation, subject to medium compatibility, pressure rating, and sealing requirements.

 

Design and Quality Control

 

Design Verification
Nominal size, pressure class, wall thickness, connection dimensions, and operating torque are checked against approved drawings and project specifications.
Material Traceability
Material grades and component identification are specified according to the order requirements. Material certificates can be provided where included in the agreed documentation scope.
Pressure Testing
Shell and seat tests are conducted according to the applicable test standard and approved inspection requirements. Test pressures and acceptance criteria follow the confirmed valve specification.
Standard Compliance
Design, dimensional, testing, and marking requirements are established for the selected configuration. Any additional compliance or certification requirement must be confirmed against the applicable technical documentation.

 

Customization Options

 

Size and Pressure Rating
Nominal size, pressure class, and connection dimensions can be specified according to the piping design and operating conditions.
Material Configuration
Body, ball, stem, and seat materials can be selected according to process compatibility, temperature, and project material requirements.
Connection and Operation
End connections, installation dimensions, and manual or actuated operation can be specified according to the approved design and control requirements.
Technical Documentation
Dimensional drawings, material certificates, pressure-test records, and inspection documents can be arranged according to the agreed order scope.

 

Manufacturing and Inspection

 

Production covers forging and material verification, machining, component inspection, assembly, and final testing according to the approved manufacturing plan. Critical dimensions, sealing surfaces, assembly fit, and operating function are checked against applicable drawings and specifications. Inspection records and product identification are prepared according to the agreed documentation requirements.

 

Frequently Asked Questions

 

Q: What is the difference between full bore and reduced bore?

A: Full bore provides a flow passage sized to meet the specified full-bore requirements, while reduced bore uses a smaller passage. Selection depends on flow requirements, pipeline design, and pigging needs.

Q: How is the correct pressure class selected?

A: Selection depends on design pressure, operating temperature, material grade, and the applicable pressure–temperature rating. The intended service conditions must be confirmed before final specification.

Q: Which materials are suitable for corrosive media?

A: Material suitability depends on fluid composition, concentration, temperature, and corrosion conditions. Body, ball, stem, and seat materials should be reviewed together.

Q: Can the valve be customized?

A: Available options may include materials, pressure classes, end connections, operating arrangements, and documentation. Final configurations are subject to technical review and design availability.

Q: Which inspection documents are available?

A: Depending on the agreed requirements, documentation may include dimensional drawings, material certificates, inspection reports, and pressure-test records.

Hot Tags: high pressure forged steel full bore ball valve, China high pressure forged steel full bore ball valve manufacturers, suppliers, factory, ball style valve, full bore ball valve, npt ball valve, shut off ball valves, socket ball valve, welded end ball valve

Send Inquiry