Products
Cryogenic Stainless Steel Flanged Ball Valve

Cryogenic Stainless Steel Flanged Ball Valve

Cryogenic Stainless Steel Flanged Ball Valves provide quarter-turn isolation for pipelines carrying liquefied gases and other low-temperature media. Stainless steel pressure-containing components, cryogenic-rated seats and seals, and an extended bonnet support low-temperature operation. Flanged ends provide connections to compatible piping systems. Valve size, pressure rating, materials and sealing arrangements are selected according to the specified operating conditions and project requirements.

Product Introduction

 

Cryogenic Stainless Steel Flanged Ball Valves provide quarter-turn isolation for pipelines carrying liquefied gases and other low-temperature media. Stainless steel pressure-containing components, cryogenic-rated seats and seals, and an extended bonnet support low-temperature operation. Flanged ends provide connections to compatible piping systems. Valve size, pressure rating, materials and sealing arrangements are selected according to the specified operating conditions and project requirements.

 

Key Advantages

 

Extended Bonnet
The extended bonnet positions the stem packing away from the cold valve body, helping maintain suitable sealing conditions during cryogenic service. Extension length is selected according to the design temperature and valve configuration.
Cryogenic Seat Sealing
Low-temperature seat and seal materials are selected to accommodate the specified temperature, pressure and process medium. The seat arrangement is matched to the required shut-off performance and operating conditions.
Stainless Steel Construction
Stainless steel body and trim options provide corrosion resistance in compatible process media. Material grades are selected according to the required temperature range, pressure rating and media compatibility.
Flanged Connections
Flanged ends allow connection to compatible pipeline systems. Nominal size, flange standard, pressure class and facing are specified to match the piping interface.

 

Technical Specifications

 

Parameter

Reference Specification

Nominal Size

DN15–DN100

Pressure Class

ASME Class 150 / 300

Design Temperature

-196°C to +80°C

Body Material

ASTM A351 CF8M

Ball Material

Stainless Steel 316

Stem Material

Stainless Steel 316

Seat Material

PCTFE or suitable TFM

End Connection

Flanged RF

Flange Standard

ASME B16.5

Operation

Lever or Gear

Design Standard

ASME B16.34

Inspection Standard

API 598

 

Materials and Construction

 

Valve Body
CF8M stainless steel is a reference body material for compatible cryogenic service. The final grade is determined by design requirements, process media and the applicable material specification.
Ball and Stem
Stainless steel 316 is a reference option for the ball and stem. Material selection and surface finish are confirmed against the approved valve design and operating conditions.
Seats and Seals
PCTFE and suitable TFM grades are potential seat options. Selection depends on minimum temperature, media compatibility, pressure conditions and required leakage performance.
Bonnet and Body Cavity
Bonnet extension and packing dimensions are determined by the specified service temperature. Where liquid can be trapped in the body cavity, the pressure-relief arrangement must be defined in the approved design.

 

Applications

 

LNG Transfer
Pipeline isolation in LNG storage, transfer and distribution systems within the specified design limits.
Industrial Gases
Isolation of liquid nitrogen, liquid oxygen and other cryogenic media, subject to material compatibility and applicable cleanliness requirements.
Cryogenic Storage
On-off isolation for compatible storage vessels, transfer lines and low-temperature distribution piping.
Process Facilities
Isolation duties in industrial systems requiring stainless steel construction, flanged connections and cryogenic-rated sealing components.

 

Product Selection Guide

 

Operating Conditions
Specify the process medium, minimum design temperature, normal operating temperature, design pressure and operating pressure. These parameters establish the required pressure rating and material configuration.
Pipeline Interface
Confirm nominal pipe size, flange standard, pressure class, facing and face-to-face dimensions. These details determine dimensional compatibility with the connecting pipeline.
Ball and Seat Design
Identify full-bore or reduced-bore requirements, floating or trunnion-mounted construction where available, and the required shut-off performance. The final arrangement must suit the operating pressure and valve size.
Operation
Select lever or gear operation according to valve size and operating torque. Actuation requirements should include the available power source, control method and operating conditions where applicable.

 

Customization Options

 

Dimensions and Flanges
Specify nominal size, face-to-face length, bonnet extension, flange dimensions and facing requirements. Drawings can be reviewed against confirmed production capabilities.
Material Selection
Body, ball, stem, seat and seal combinations can be evaluated against the specified medium, temperature and pressure.
Operating Configuration
Manual and gear-operated options can be selected according to the approved valve design. Compatible actuation and accessories can be reviewed where available.
Project Specifications
Provide technical drawings, applicable standards, inspection criteria, material traceability requirements and documentation needs for configuration review.

 

Quality Control and Documentation

 

Material Verification
Material grades and identification are checked against the approved material specification and applicable records.
Dimensional Inspection
Flange interfaces, face-to-face dimensions and critical assembly measurements are checked against approved drawings and tolerances.
Pressure and Leakage Tests
Shell and seat leakage tests are performed according to the applicable approved inspection procedure. Cryogenic testing can be included when required and agreed for the order.
Technical Records
Material certificates, dimensional inspection records, pressure test reports and product data sheets can be supplied according to the confirmed documentation scope.

 

Manufacturing and Supply Support

 

Production planning follows the confirmed specifications, approved drawings, material requirements and inspection plan. Technical review establishes the required valve configuration before production.
For project orders, specify quantities, delivery schedule, inspection arrangements and documentation requirements. These details support production planning and quotation preparation.

 

Frequently Asked Questions

 

Q: Can the valve operate at -196°C?

A: The selected model must be rated for -196°C, with compatible body materials, seats, seals and pressure limits confirmed in the approved technical data.

Q: Why is an extended bonnet used?

A: The extended bonnet positions the stem packing away from the cold valve body, helping maintain suitable stem-sealing conditions during cryogenic service.

Q: Which seat material should be selected?

A: PCTFE or a suitable TFM grade may be considered. The final choice depends on temperature, process medium, pressure and leakage requirements.

Q: Are custom flange dimensions available?

A: Flange standards, pressure classes, facing and face-to-face dimensions can be reviewed against project drawings and confirmed production capabilities.

Q: What inspection documents can be supplied?

A: Material certificates, dimensional inspection records, pressure test reports and product data sheets can be provided according to the agreed inspection and documentation requirements.

Hot Tags: cryogenic stainless steel flanged ball valve, China cryogenic stainless steel flanged ball valve manufacturers, suppliers, factory, air ball valve, ball and valve, ball valve ball, valve 8, valve of the ball, welded end ball valves

Send Inquiry