Product Introduction
The Pneumatic Actuated Metal Seated Trunnion Ball Valve provides automated on-off isolation for industrial pipelines. Its trunnion-mounted ball is supported by upper and lower bearings, while metal seating surfaces provide shut-off for specified high-temperature, high-pressure and abrasive services. A pneumatic actuator rotates the ball 90° for remote operation. Valve materials, seat treatment, pressure rating and actuator output are selected according to the operating medium, design conditions and project requirements.
Key Advantages
Metal Seating
Metal-to-metal seating supports applications requiring heat-resistant seating materials and controlled wear. Ball and seat surface treatments are selected according to the medium, temperature and specified leakage acceptance criteria.
Trunnion Support
The ball is supported by upper and lower trunnions, helping manage pressure-related loads and operating torque. This arrangement provides a basis for actuator sizing across different valve sizes and pressure ratings.
Pneumatic Control
Quarter-turn actuation enables remote opening and closing. Double-acting and spring-return options accommodate different control and shutdown requirements.
Application-Based Configuration
Bore design, body materials, seat treatment, end connections and control accessories can be specified to match process conditions and piping requirements.
Technical Specifications
|
Parameter |
Specification |
|
Valve Type |
Trunnion-Mounted Ball Valve |
|
Operation |
Pneumatic |
|
Nominal Size |
2–24 in |
|
Pressure Class |
ASME Class 150–600 |
|
Reference Temperature Range |
-29°C to 450°C |
|
Body Material |
Carbon Steel, Stainless Steel |
|
Ball Material |
Stainless Steel or Specified Alloy |
|
Seat Type |
Metal-to-Metal |
|
Seat Treatment |
Hard-Facing or Protective Coating |
|
Bore Design |
Full Bore or Reduced Bore |
|
End Connection |
Flanged or Butt Weld |
|
Actuator Type |
Double-Acting or Spring-Return |
|
Rotation |
90° |
|
Design Standard |
ASME B16.34 |
|
Flange Standard |
ASME B16.5 |
|
Test Standard |
API 598 or Specified Project Standard |
Materials and Construction
Valve Body
Carbon steel and stainless steel options are selected according to design pressure, temperature, corrosion conditions and process compatibility.
Ball and Seats
Metal seating components may use specified hard-facing or coating systems to address wear and operating conditions. Surface finish and material pairing are confirmed according to the required shut-off performance.
Stem and Packing
Stem materials and packing systems are selected according to operating pressure, temperature and process media. Special emissions requirements can be included in the technical specification.
Pneumatic Actuator Configuration
Double-Acting Actuator
Compressed air powers both opening and closing strokes. Sizing considers valve torque, differential pressure, air supply and the required operating margin.
Spring-Return Actuator
A mechanical spring returns the valve to a specified position when actuating air is lost. The required fail-open or fail-closed action must be confirmed in the control specification.
Control Accessories
Solenoid valves, limit switch boxes, position indicators and air preparation accessories can be specified according to the control system. Operating time, feedback signals and accessory ratings are confirmed during configuration.
Industrial Applications
Oil and Gas
Automated isolation in pipeline and process systems where metal seating is specified for the operating conditions.
Refining and Petrochemical
Isolation of hot process fluids and selected abrasive services, subject to material compatibility and seating requirements.
Power Generation
On-off isolation in industrial fluid and gas systems with defined pressure and temperature conditions.
Mining and Mineral Processing
Selected particle-bearing services where seat materials, surface treatments and valve design suit the process medium.
Industrial Gas Processing
Remote isolation for specified gas services, with pressure ratings and sealing materials selected for the operating conditions.
Customization Options
Materials and Surface Treatment
Specify body alloys, ball materials and seat treatments according to corrosion, temperature and wear requirements.
Piping Connections
Select nominal size, pressure class, flange dimensions, facing or butt-weld ends to match the piping design.
Actuator and Controls
Configure actuator action, air supply requirements, fail position, switching accessories and position feedback.
Project Documentation
Technical datasheets, dimensional drawings, material certificates and inspection records can be specified according to the agreed order requirements.
Design Standards and Quality Testing
Design Verification
The applicable design standard, pressure rating, face-to-face dimensions and end connections are confirmed for the selected model.
Pressure and Seat Testing
Body pressure tests and seat leakage tests follow the applicable test standard and specified acceptance criteria. The required leakage class and test procedure should be confirmed before order placement.
Material Inspection
Material grades and traceability records are checked against the approved specification. Additional inspection documents can be included where required.
Actuator Function Test
The assembled valve and actuator are checked for travel, operating direction, switching function and specified accessories. Inspection scope follows the agreed technical requirements.
Valve Selection Guide
Operating Conditions
Provide the process medium, design pressure, operating temperature and relevant particle or abrasion characteristics.
Pipeline Data
Confirm nominal size, pressure class, bore type, end connection and dimensional standards.
Sealing Requirements
Specify the required seat leakage acceptance criteria and any applicable fire-safe or fugitive-emission requirements.
Actuator Requirements
Define available air pressure, actuator action, fail position, operating time, control signals and feedback accessories.
Technical Documents
Provide the project datasheet, piping specifications and inspection requirements to confirm the proposed configuration.
Frequently Asked Questions
Q: What is a metal seated trunnion ball valve used for?
A: It provides automated pipeline isolation where metal seating surfaces and a supported ball structure are specified for the process conditions.
Q: What temperature range is available?
A: Reference configurations cover -29°C to 450°C. The allowable range depends on the selected body, seat treatment, packing and sealing materials.
Q: Can it handle abrasive media?
A: Selected abrasive services can be considered with suitable ball and seat treatments. Selection depends on particle size, concentration, flow conditions and wear requirements.
Q: How is the pneumatic actuator sized?
A: Sizing considers valve operating torque, differential pressure, available air pressure, operating margin and required fail action.
Q: Can the valve be customized?
A: Available configurations can be specified by size, pressure class, materials, seat treatment, end connections and actuator accessories.
Q: What information is needed for a quotation?
A: Provide the valve size, pressure class, process medium, design temperature, connection standard, material requirements, actuator action and testing criteria.
Hot Tags: pneumatic actuated metal seated trunnion ball valve, China pneumatic actuated metal seated trunnion ball valve manufacturers, suppliers, factory, 1 piece ball valve, api 6d ball valve, cast steel ball valve, forged api 608 ball valve, metal ball valves, process ball valve

